KMS LPV

Viscosity up to 8,000 cPs
  • For liquids with max viscosity 8.000 cPs
  • PMMA pump head (with SS balls)
  • Liquid ends: 3/4h injection valve, 16x22 PVC suction hose and 8x12 PE injection hose
  • Not included: Stainless steel foot filter with valve (+ . 73,00).
Note: flow may change according to viscosity. Flow rates indicated refer to a measure with water.
MODELS KMS DC LPV KMS MF LPV KMS CL LPV KMS EN LPV KMS PH LPV KMS RH LPV KMS CO PLUS LPV KMS CL PLUS LPV KMS PLUS LPV
CODE KDC KMF KML KEN KPH KRH KPO KPL KMU
Dosing system Proportional Constant/Proportional Proportional Timered Proportional Proportional Constant Constant Constant/Proportional
Flow sensor input                
Stand-by input          
Alarm output     optional
(+ € 30,90)
optional
(+ € 30,90)
    optional
(+ € 30,90)
Digital signal              
Current signal (0/4mA=0 pulses; 20mA=max pulses              
Functions Constant (lph, sph, spm)
  • MULTIFUNCTION (Constant, Divide, Multiply, PPM, Batch, Volt, mA, %, ml/q)
  • Set AUTOMATIC REPRIMING, with a flow sensor installed.
  • Set STROKES RECOVERY SYSTEM, with a flow sensor installed.
  • SET UPKEEP DOSING MODE in plant shutdown event.
  • WORK-PAUSE MODE: cyclic dosing controlled by an external contact.
Free Chlorine (Cl<sub>2</sub> meter (to specify) - supplied without probe
  • Weekly Timer
  • Electrovalve control (optional)
pH meter (0-14) - supplied without pH probe ORP meter (0-2000mV) - supplied without ORP probe Speed reducer (1-10) Speed reducer (1-10) Working modes:
  • constant / constant with 1-10 divider
  • 1-10 pulses multiplier
  • 1-10 pulses divider
  • 10-100 pulses divider
  • 100-1000 pulses divider
  • mA current signal (0/4 mA=0 pulses; 20mA=max pulses)


Warning: flow rates depends on viscosity. The flow rates indicated refer to a measure with water.